text.skipToContent text.skipToNavigation
HU
Choose your Language
Megnevezés
Rugalmas tengelykapcsoló
Kivitel 1
kúpos persellyel és feszítőgyűrűvel
Alaptest anyaga
alumínium
Komponens anyaga
poliuretán
Komponensek színe
kék
L=Hossz
90
C (ISO 4029)
M5
Csavarok meghúzási nyomatéka Nm
6
D1 (H7)
28
D1/D2 max.
38
D1/D2 min.
19
D2 (H7)
28
D4
65
Kapcsolócsillag keménység
80 Shore A
L1
35
L2
20
Max. forgatónyomaték Nm
92
Max. szögeltérés (°)
1,3
Max. tengelyeltérés axiális (mm)
+1,5 / -0,7
Max. tengelyeltérés radiális (mm)
0,2
Méret
28
Névleges nyomaték Nm
46
Rugómerevség radiális (N/mm)
990
Tehetetlenségi nyomaték (gm²)
0,65
Torziós merevség dinamikus (Nm/rad)
2350
Torziós merevség statikus (Nm/rad)
1370
UNSPSC Code
23153402
max. fordulatszám f/perc
12000
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes

Leírás

Material
Hub aluminium.
Conical ring steel
Coupling spider polyurethane.
Version
Hub bright.
Coupling spider blue Shore 80A.
Coupling spider yellow Shore 92A.
Coupling spider red Shore 98A.
Note
Elastomer dog coupling consisting of two hubs and an elastomer coupling spider. They are suitable for compensating axial, radial and angular misalignments and for cushioning vibrations and torque shocks.

The polyurethane coupling spiders are available in various hardness grades. As the hardness of the coupling spider increases, the torque and stiffness transmitted increases, and as the hardness decreases, the displacement capacity and cushioning increases.

Pre-tensioning of the spiders in the coupling hubs make this variant play-free.

Supplied unassembled.
Technical Data
Reibschlussmoment-Tabellen
Temperature range
Blue Shore 80A: -50 °C to +80 °C. Briefly -60 °C to +120 °C.
Yellow Shore 92A: -30 °C to +90 °C. Briefly -50 °C to +120 °C.
Red Shore 98A: -30 °C to +90 °C. Briefly -40 °C to +120 °C.
Assembly
The elastomer dog couplings have an H7 tolerance. The recommended clearance tolerance is 0.02 - 0.05 mm. This tolerance and lubricating the shaft journals aids assembly and removal.

For installation, the hubs of the elastomer dog coupling are simply pushed onto the shafts. Set to the correct axial position and, using a torque wrench, tighten the clamping screws to the torque indicated in the table. To increase the misalignment compensation of the coupling and the service life of the spider, the dimension L2 should be observed.
On request
Hub bores D1 and D2 with separate tolerance class or range.
CAD modelljeink letöltéséhez először be kell jelentkeznie. Ha még nem hozott létre fiókot, kérjük, regisztráljon a "Saját fiók" alatt (a képernyő jobb oldalán), és kövesse az utasításokat.

Other customers also bought