Crank handle Reamed hole with slot thermoplastic black grey RAL 7021 06502-1314056
- For long adjustment travel
- Application sectors: machine, plant, equipment construction and measuring devices
- Swivels back automatically after releasing
- Version: with keyway
Mennyiségi egység
€43.02
hozzáértve Áfa
A Ön kosarába behelyezve
Megnevezés
Forgatókar
Kivitel 1
illesztő furat horonnyal
Kivitel 2
biztonság
Alak
B
Alaktípus
biztonsági fogantyú
Terméktípus
biztonsági fogantyú
Alaptest
anyaga
termoplaszt
Alaptest
színe
feketésszürke, RAL 7021
Komponens
anyaga
termoplaszt
Komponensek
színe
feketésszürke, RAL 7021
A=Tengelytávolság
125
D2=Rögzítőfurat
14
D7=Menet
M6
H1=Fogantyúmagasság
82
H=Magasság
139
L=Hossz
161
B3
5
D
36
H2
44
H3
18,5
H4
7,5
L2
19,5
Méret
3
T
16,3
UNSPSC Code
31162801
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
carbon-black extracts
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ REACh SVHC 2 name > threshold
previous lead possible
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Leírás
Material
Crank thermoplastic.
Cylinder grip thermoplastic and steel.
Cylinder grip thermoplastic and steel.
Version
Black grey thermoplastic.
Steel parts black oxidised.
Steel parts black oxidised.
Note
The hub cover is supplied unassembled. The crank handles can be secured to the shaft by cross-pinning or by parallel key together with a DIN 6912 cap screw and DIN 7349 washer. Two actions must be made to bring the safety cylinder grip into an operating position:
- Swing the grip out around the pivot shaft until it stops (90°).
- Push the grip in an axial direction into the lock position.
The pushed-in position is the most comfortable for cranking. The grip swings back automatically after releasing.
Versions with transverse bore are secured using the ISO 4027 (DIN 914) grub screw.
- Swing the grip out around the pivot shaft until it stops (90°).
- Push the grip in an axial direction into the lock position.
The pushed-in position is the most comfortable for cranking. The grip swings back automatically after releasing.
Versions with transverse bore are secured using the ISO 4027 (DIN 914) grub screw.
Drawing reference
1) Position of the transverse bore to the keyway is offset by 90°.
Accessory
07161 Cap screws with low head DIN 6912
Fontos megjegyzés a CAD modellek letöltéséhez
CAD modelljeink letöltéséhez először be kell jelentkeznie. Ha még nem hozott létre fiókot, kérjük, regisztráljon a "Saját fiók" alatt (a képernyő jobb oldalán), és kövesse az utasításokat.
Other customers also bought
